Bodywork Accessories

#06: P/N BWK2910: Top Support Kit for "506" Driver Panel

INCLUDES LEFT & RIGHT TOP SUPPORT USED TO MOUNT THE "506" STYLE DRIVER PANEL. KG P/N# SUP.FR.501

#06: P/N BWK2912: Top Support Kit for KG "MK20" Driver Panel

INCLUDES LEFT AND RIGHT SIDE.  KG P/N# SUP.FR.001

#07: P/N BWK2922: Adjustable Lower Bracket Kit for Panel

KG P/N# SUP.FR.050

#08: P/N BWK2950: Panel Hardware Kit

INCLUDES: 3 SAFETY CLIP'S, 3 SUPPORT PIN'S & 3 RUBBER GROMMET'S. SUPPORT PIN KG P/N# RC.157 SAFETY CLIP KG P/N# RC.158 RUBBER GROMMET KG P/N# RC.156

#11: P/N BWK3930: Nose Mounting Breakaway Clamp

2 PACK. KG P/N# AT.002

#12: P/N BWK3920: Nose Mount

2 PACK. KG P/N# AT.021.NE

#13: P/N BWK3923: Nose Mount, Push Back Style

CIK APPROVED (2 PACK). KG P/N# AT.022.NE

#14: P/N BWK3905: "506" Transparent Deflector Kit

MOUNTS TO THE "506" NOSE FOR IMPROVED AIRFLOW. CIK/FIA APPROVED. HARDWARE INCLUDED. KG P/N# RC.227.TR

P/N BWK1935: Unico Side Pod Plug

EACH. KG P/N# RC.155

P/N BWK2907: Top Support for Driver Panel

SOLD BY THE EACH KG P/N# SUP.FR.500

P/N BWK2908: KG Panel Top Support Set, for 507/508 Panel

INCLUDES LEFT AND RIGHT STRAP

P/N BWK2913: KG Panel Top Support Reinforcement Kit

INCLUDES HARDWARE. SUPPORT BETWEEN THE TWO TOP STRAPS KG P/N# AC.040.NE

P/N BWK2952: KG Panel Rubber Grommet

P/N BWK2958: KG 508 Replacement Piece Bottom

REPLACEMENT FOR THE PIECE THAT ATTACHES TO THE BOTTOM OF THE PANEL KG P/N# RC.270

P/N BWK3910: Kid Kart Nose Mount

FOR KID KART NOSES ONLY. KG P/N# AT.001

P/N BWK3915: Front Bumper Mid-Support Bracket

AVAILABLE IN RED ONLY. KG P/N# AT.050.RS

P/N BWK59**:Rear Bumper Mounting Kit

AVAILABLE FOR MULTIPLE FRAME SIZES (2 PIECES PER KIT). 28MM KG P/N# RC.232.28 30MM KG P/N# RC.232.30 32MM KG P/N# RC.232.32

P/N BWK5900: RLV Rear Bumper Saver

ALUMINUM.FITS ADJUSTABLE PLASTIC ADULT, KID KART & CADET REAR BUMPERS. NOT CIK APPROVED.

P/N BWK5905: RLV Rear Spoiler Mounting Kit

FOR FULL SIZE KARTS AND FITS ADJUSTABLE KID KART & CADET REAR BUMPERS. NOT CIK APPROVED.

P/N BWK5910: KG Rear Spoiler Mounting Kit

CIK APPROVED & FOR FULL SIZE KARTS. KG P/N# AT.011

P/N BWK5973: KG C3 Replacement End

KG P/N# RC.248.NE

P/N BWL1910: Rubber Sleeve for Nerf Bar

EACH. KG P/N# AC.028.AG

P/N BWL1925: Antivibration Sleeve for Nerf Bar

EACH. KG P/N# AC.023.NE

P/N BWL2805: Fuel Recovery Tank w/ Mounting Strap, 4 Cycle

USED ON BRIGGS & STRATTON LO206 ENGINE. INCLUDES TANK, ZIP TIE STRAP AND A MOUNTING SCREW. RECOVERY TANK KG P/N# RC.134

P/N BWL9050: KG Foot Rest

EACH. KG P/N# AC.021.NE

P/N BWL9300: Floorpan Conical Washer

17MM X 6MM, ALLOWS THE BOLT HEAD TO REST IN THE WASHER FOR A FINISHED LOOK WITH NO RATTLE (10 PACK). KG P/N# AC.010.NE

P/N BWL9305: Floorpan Rubber Grommet

20MM X 4MM X 6MM HOLE, USED TO REDUCE PAN VIBRATION AND ELIMINATES FLOOR BIND WHICH INTERFERES WITH CHASSIS FLEX (10 PACK). KG P/N# AC.012.NE

P/N BWL9500: Chassis Frame Protection Kit

INCLUDES 4 PIECES AND HARDWARE. KG P/N# AC.035.NE

P/N BWL9605: KG Sprocket Guard, Black, Plastic

INCLUDES HARDWARE. KG P/N# AC.038.NE

P/N CHZ2103: KG Chain Guard Extension w/ Hardware

BLACK, INCLUDES HARDWARE (BOLT, NUT, & WASHER)   SIZE: 19 3/4" X 1 3/4"   KG P/N RC.132

P/N STZ0110: Conical Seat Washer, Plastic

30MM X 8MM CONICAL WASHER ALLOWS THE BOLT HEAD TO REST IN THE WASHER FOR IMPROVED COMFORT. (10 PACK). KG P/N# AC.011.NE

P/N STZ0115: Conical Seat Washer, Aluminum

30MM X 8MM X 5MM, ANODIZED BLACK (10 PACK)

P/N STZ0120: Nylon Seat Washer

USED TO SPACE AND ISOLATE SEAT STRUTS FROM THE SEAT (10 PACK)

P/N STZ0150: Seat Mounting Kit

COMES WITH PLASTIC CONICAL WASHERS & WILL FIT ALL SEATS

P/N STZ0155: Seat Mounting Kit, Upgraded

COMES WITH ANODIZED BLACK ALUMINUM CONICAL WASHERS AND WILL FIT ALL SEATS.